BricsCAD und AutoCAD Funktionsvergleich
Zeichnungen | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Natives DWG-Dateiformat (bis AutoCAD 2021) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Passwortschutz | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
eTransmit | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Plansatz Verwaltung | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Geografische Lage | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Zeichnungsvergleich | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Cloud Zusammenarbeit | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Benutzeroberfläche | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Dunkle und helle Farbthemen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Industriestandard-Befehle, Aliase und Variablen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Befehlszeile (Autovervollständigen, Mittelstring, Anklickbare Optionen) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Registerkarte Start | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Datei (Zeichnungs) Registerkarten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Model und Layout Registerkarten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Layout Manager | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Menü | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Werkzeugkästen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Multifunktionsleiste | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Werkzeug Paletten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Kontextbezogene Rechtsklick-Menüs | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Interaktives Quad Menü | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Statusleiste | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Arbeitsbereiche | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Durchsuchbare Einstellungen (Variablen) Dialog | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Sperrbare Benutzeroberfläche | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
"Clean Screen" Modus | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Zeichnungs Explorer | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Anpassbare Benutzeroberfläche (CUI) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Struktur Browser | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Auswahl, Fang & Spur | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Auswahlfilter (SAUSWAHL) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Add Selected | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Ähnliches wählen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Auswahl blättern | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Objektfänge (Ofang) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Polare Spur | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Zschnittpunkt 3D-Fang | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Nächstgelegene Entfernung | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Adaptiver Rasterfang | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Echtzeit-Erkennung von Umgrenzungen | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
2D Dynamisches BKS | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
3D Dynamisches BKS | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Zeichenwerkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Linie, Polylinie, 3D-Polylinie, Spline, Strahl, K-Linie | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Multilinien und Multilinien-Stile | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Kreis, Bogen, Ellipse, Ellipsenbogen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Polygon, Rechteck, Region, Ring, Punkt | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Spirale | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
2D-Parameter, Abhängigkeiten | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
2D Autoabhängigkeit | ✓ | ✓ | ✓ | ✓ | ✓ | 2 | 2 |
Beschriftungswerkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Bemaßungen, Bemaßungsstile | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Mehrfachführungen und Mehrfachführungs-Stile | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Ein- und mehrzeiliger Text, Textstile, Texteditor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Schraffuren, Farbverläufe, Schraffur/Farbverlaufs-Editor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Abdeckungen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Revisions Wolken | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Attribute, Attribut-Editor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Tabellen, Tabellenstile | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Felder | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Daten Extrahieren | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Daten Verknüpfung | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Beschriftungs Maßstab | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Rechtschreibprüfung | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Bearbeitungswerkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Verschieben, Kopieren, Drehen, Skalieren, Dehnen, Spiegeln, Ausrichten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Extrahieren, Dehnen, Länge, Brechen, Verbinden | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Abrunden, Fasen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
KopierenGeführt | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
SchiebenGeführt | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Griff-Bearbeitung | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Eigenschaften Panel | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Manipulator (3D-Gizmo) | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Zeichenreihenfolge | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Rückgängig pro Objekt (Eigenschaftsverlauf) | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Optimiere | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Vereinfachen | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Referenz Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Blöcke, Block-Editor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Dynamische Blöcke | 1 | 1 | 1 | 1 | 1 | ✓ | ✓ |
Block Flächen Kamera | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Blockify | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Assoziative Reihen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Dwg (Xref) Anhängen, Beschneiden, Binden, Bearbeiten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
PDF-Anhang, beschneiden | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Bild anhängen, beschneiden, anpassen, Transparenz | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Punktwolken Farbmap | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Visualisierungs-Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Layer, Layer-Staaten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Transparenz | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Visuelle Stile | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
BlickVon (ViewCube™) | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Perspektive anpassen | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Lichter | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Sonneneigenschaften | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
MAterialien | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Render | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Animations Editor | o | ✓ | ✓ | ✓ | ✓ | o | o |
Durchgehen Navigation | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
ANIPFAD Befehl | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Modellierungs-Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
ACIS Modellierung | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Volumenkörper- und Oberflächen-Modellierung | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Volumenkörper Grundkörper | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Netz Grundkörper | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Polykörper | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Vereinigen, Abziehen, Schnittmenge, Überlagerung | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Extrudieren, Rotieren, Ausformen, Sweep, Verstärken | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Drehen | o | ✓ | ✓ | ✓ | ✓ | o | o |
Abrunden, Fasen | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Kappen | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Mehrfach-Schnitte | o | ✓ | ✓ | ✓ | ✓ | o | o |
T-verbinden, L-verbinden, Verbinden mit Nächstem | o | ✓ | ✓ | ✓ | ✓ | o | o |
Kanten extrahieren | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Direkt Modellierung | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Deformierbare (Freiform) Modellierung | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Prüfen, Vereinfachen | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Heften | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
3D-Parameter, Abhängigkeiten | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
3D-Autoparametrisieren | o | ✓ | ✓ | ✓ | ✓ | o | o |
3D Blockify und ParametrischesBlockify | o | ✓ | ✓ | ✓ | ✓ | o | o |
3D Parametrische Designtabellen | o | ✓ | ✓ | ✓ | ✓ | o | o |
Schnitt Ebenen | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Zeichnungs Ansichten | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
3D-Gewinde | o | ✓ | ✓ | ✓ | ✓ | o | o |
Punktwolke ausrichten | o | ✓ | ✓ | ✓ | ✓ | o | o |
Punktwolke Bubble Viewer | o | ✓ | ✓ | ✓ | ✓ | o | o |
Civil-Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
TIN Flächenmodellierung | o | ✓ | ✓ | ✓ | ✓ | o | o |
TIN Volumen Oberfläche | o | ✓ | ✓ | ✓ | ✓ | o | o |
Gradierung (GRADUIEREN) | o | ✓ | ✓ | ✓ | ✓ | o | o |
Ausrichtungen | o | ✓ | ✓ | ✓ | ✓ | o | o |
Profilkörper | o | ✓ | ✓ | ✓ | ✓ | o | o |
Civil 3D Objekt-Enabler | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Architectural Desktop Object-Enabler | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
CADWorx Objekt-Enabler | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Architektur-Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
BIM Features | o | o | ✓ | o | ✓ | o | ✓ |
Werkzeuge zur Tragwerks-Modellierung | o | o | ✓ | o | ✓ | o | ✓ |
Projekt Datenbank | o | o | ✓ | o | ✓ | o | ✓ |
Bibliotheks Datenbank | o | o | ✓ | o | ✓ | o | ✓ |
Standort, Gebäude und Geschosse | o | o | ✓ | o | ✓ | o | ✓ |
Fenster und Türen | o | o | ✓ | o | ✓ | o | ✓ |
Vollständig parametrische BIM-Komponentenerstellung | o | o | ✓ | o | ✓ | o | o |
3D Bereiche | o | o | ✓ | o | ✓ | o | ✓ |
Quickdraw | o | o | ✓ | o | ✓ | o | o |
Quickbuilding | o | o | ✓ | o | ✓ | o | o |
Punktwolken Geschoss Erkennung | o | o | ✓ | o | ✓ | o | o |
Punktwolken Projektion | o | o | ✓ | o | ✓ | o | o |
Punktwolken Geometrie Erkennung | o | o | ✓ | o | ✓ | o | o |
Punktwolke FitPlanar (Geometrieerkennung) | o | o | ✓ | o | ✓ | o | o |
Übertragen (BIMÜBERTRAGE) | o | o | ✓ | o | ✓ | o | o |
Benutzerdefinierte BIM-Eigenschaften | o | o | ✓ | o | ✓ | o | o |
Zeichnungs-Anpassungen | o | o | ✓ | o | ✓ | o | o |
Analytisches Modell | o | o | ✓ | o | ✓ | o | o |
Python-Skripte (Beta) | o | o | ✓ | o | ✓ | o | o |
Mechanical-Werkzeuge | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Mechanical Browser | o | ✓ | ✓ | ✓ | ✓ | o | o |
Bauteil Bibliothek | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Verrohrung | o | ✓ | ✓ | ✓ | ✓ | o | o |
Baugruppen Modellierung | o | o | o | ✓ | ✓ | o | o |
Explosions Ansichten | o | o | o | ✓ | ✓ | o | o |
Kinematische Analyse | o | o | o | ✓ | ✓ | o | o |
Stückliste | o | o | o | ✓ | ✓ | o | o |
Blechkonstruktion | o | o | o | ✓ | ✓ | o | o |
Konvertierung von 3D-Volumenkörpern in Blechkonstruktionen | o | o | o | ✓ | ✓ | o | o |
Eck-Ausklinkung für angrenzende Kanten-Laschen | o | o | o | ✓ | ✓ | o | o |
Ausgeformte Biegungen | o | o | o | ✓ | ✓ | o | o |
Einfärbung | o | o | o | ✓ | ✓ | o | o |
Diagnose für ungültige Blechbauteil Features | o | o | o | ✓ | ✓ | o | o |
Stapelverarbeitung | o | o | o | ✓ | ✓ | o | o |
Import, Export, Ausgabe | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Drucken/Plotten | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Veröffentlichen / Stapel-Plot | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
CTB & STB Tabellendateien | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
PC3 Druckerkonfigurationsdateien | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Benannte Seiteneinrichtungen | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
PDF Import, Export | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
DAE Import, Export | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
IFC Import, Export | o | o | ✓ | o | ✓ | o | ✓ |
3DM Import, Export | o | ✓ | ✓ | ✓ | ✓ | o | o |
LandXML Import, Export | o | ✓ | ✓ | ✓ | ✓ | o | o |
RFA Import | o | o | ✓ | o | ✓ | o | o |
SKP Import | o | ✓ | ✓ | ✓ | ✓ | o | o |
DGN Import | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
RVT Import | o | o | ✓ | o | ✓ | o | o |
DWF Export | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
SVG Export | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
FBX Export | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
STL Export | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Punktwolken Export | o | ✓ | ✓ | ✓ | ✓ | o | o |
Zusätzliche Formate verfügbar mit dem BricsCAD Communicator | o | ✓ | ✓ | ✓ | ✓ | o | o |
Programmierung | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
ActiveX | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Objekt Daten Editor | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Script Recorder | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Volle LISP-Unterstützung (vl, vlr, vla und vlax) | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Solutions Development System (SDS/ADS) | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
DCL Engine | ✓ | ✓ | ✓ | ✓ | ✓ | o | ✓ |
COM API | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
Visual Basic für Applikationen (VBA) | o | ✓ | ✓ | ✓ | ✓ | o | o |
VBA DVB Projekte unterstützen | o | ✓ | ✓ | ✓ | ✓ | o | o |
.NET | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
BRX (ARX) | o | ✓ | ✓ | ✓ | ✓ | o | ✓ |
TX (Teigha eXtensions) | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Unterstützung für CUI-Menüdateien mit Diesel-Ausdrücken | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Lizenzierung | |||||||
BricsCAD® | AutoCAD® | ||||||
Lite | Pro | BIM | Mechanical | Ultimate | LT | Vollständig | |
Lizenz für mehrere Plattformen | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Dauerhaft | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Dauerhaft + Wartung | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Abonnement | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Netzwerk Mehrbenutzer | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Volumen (unbefristet) | ✓ | ✓ | ✓ | ✓ | ✓ | o | o |
Akademisch | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
(1) Sie können dynamische Blockeinfügungen manipulieren, aber Sie können keine dynamischen Blockdefinitionen erstellen.
(2) Geometrische Abhängigkeiten können automatisch verwendet werden, aber eine Kombination von geometrischen und Bemaßungs Abhängigkeiten ist nicht automatisch möglich.